Mitec Performer 32 B-Stock

Perfect for Installation, Tour, Low-Budget-Studioproductions, Projects, Broadcast. Extreme flexible, there are two standards. Also there are some add on modules for more inputs with eight channels. You can couple several consoles together, to have more channels. If it´s not enough: You can - like at the "Event" - put on an "Add-on-Bridge" with Compressors, more aux-sends, and more. More flexibility isn´t possible at a normal series-console - only as a Vintage-Console, but not at this price.... Normally the "Performer"-Series are three consoles, as 16/4/2 (Performer Type 24) and as 24/6/4/2 (Perfomer 32) and 24/8/8/2 (Performer 40)- Configuration. Aux master sends and the group outs are unbalanced, +6dB. The group outs can be internally recoded to -10dB. Except for the stereo in and aux send, all inputs and outputs are equipped with inserts. The external cable power supply is equipped with a robust, lockable 4-pin plug connection. Small, compact. Handy. Just take it with you. Nevertheless stable construction. Modularly expandable. All mono input channels have two separate inputs (Line/Mic). Each channel contains a 4-band EQ (2 x semi-par. mids), five aux paths, PFL and mute, and the complete routing. All aux paths can be internally recoded pre/post. The stereo inputs have a 2-band EQ, and also five aux buses. The same complete routing as with the mono inputs. The master section contains the MIDI mute automation, headphone amps, 4 x FX stereo returns, FX to Aux. 48 V switch, talkback, tape record and the VU meters for the master out. The MIC/Line inputs are balanced, as are the master outputs. Aux master sends and the group outs are unbalanced, +6dB. The group outs can be internally recoded to -10dB. Except for the stereo in and aux send, all inputs and outputs are equipped with inserts.