| Product # | 251311 |
| Brand | LAB Gruppen |
| Category | Power Amplifier |
| Brand Category | LAB Gruppen - Power Amplifiers |

CMA2402
2 x 240 Watt Commercial Mixer Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. CMA2402 is easy to install and operate – even for non-technical personnel. Simply put, the CMA2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

Easy to Install
The CMA2402 comes equipped with rubber feet, enabling the amps to be placed on a desk, shelf or any clear surface without any additional installation requirements. However, optional rack mounting hardware is also supplied, allowing one or several models to be housed and protected inside an enclosure. This adds extensive flexibility as a single product can be housed in a half 19" rack or full rack enclosure as well as a pair of amplifiers can easily be mounted side-by-side in a single rack space. With the included brackets the unit can also be mounted to a wall or under a table/shelf.

Sublimely Simple Controls
CMA2402’s controls are sublimely intuitive, allowing the operator to quickly make adjustments. The front panel power button and Master volume knob are easily accessible, enabling virtually anyone to operate the system. Bass and Treble controls are also available for fine tuning – but require a tool when making changes.

Output Configuration
Intuitive configuration of the flexible outputs is provided directly adjacent to the rear panel Euroblock output connectors with dipswitches, which allow selection of 100 V, 70 V, 8 Ω, or 4 Ω operation individually per channel. This configures both the maximum voltage of the output and the gain through the device. An individual control engages the built-in high-pass filter, which should be used on all constant voltage systems to avoid saturation on transformer-enabled loudspeakers and to help maintain sound integrity.

Expandable Remote Control
The RJ45 receptacle on the rear panel opens up a broad range of remote control options, including the CRC-V Series of wall controllers and a stylish tabletop controller, the LAB.LEVEL. All can be interconnected via inexpensive and readily-available Ethernet cabling.

System Scalability
Commercial installs vary widely in scope and often grow and change over time. The CMA2402 is part of a family of products that provides both single and dual zone products that are perfect for building out a system to any size. With its individual zone volume and remote control capabilities, the CMA2402 is an ideal building block for a dynamic and scalable system solution.

Real-World Energy Savings
The CMA2402 2 x 240 Watt Commercial Amplifier makes it easy to bring highest-quality music and announcements to business and industrial environments in an easy to integrate – and even easier to operate system. Plus, with features such as its Auto Ramp and revolutionary direct drive constant power technology, the energy efficient CMA2402 can generate enough energy savings to pay for itself in virtually no time at all.
- - 2 x 120 Watt mixer amplifier for commercial and industrial applications
- - Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- - 8 mic/line inputs with individual volume controls wand output routing
- - Individual front panel master volume and bass/treble controls for each output
- - Configurable priority muting function for background music override
- - Direct drive, constant power technology for superior audio performance and reliability
- - GPI remote volume control using standard RJ-45 connector and Ethernet cable
- - Auto Ramp circuitry for quiet and fast power up/down enables realworld energy savings
- - Front panel power control button for direct access
- - Aux outputs for expansion to additional amplifiers
- - Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- - Euroblock type mic/line input and output connectors
- - Convection-cooled, fan-less amplifier technology for low noise
| Product Dimensions | |
|---|---|
| Depth | 248mm |
| Width | 437mm |
| Height | 44mm |
| Product Details | |
|---|---|
| Product Number | 251311 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Power Amplifier | |
| Date | September 2025 |
| Product Quantity | |
|---|---|
| Unit | 1 piece(s) |
| Dimension | |
|---|---|
| Weight | 3.5kg |
| Box Depth | 527mm |
| Box Width | 437mm |
| Box Height | 113mm |